MODEL: 3.6SP ASHLY Protea 3.6SP Loudspeaker Management System 3 Input 6 Output
• One Rack Space
• Three Inputs - Six Outputs
• Extremely Intuitive User Interface
• Crossover, EQ, Delay and Limiter Functions
• Outputs Assignable to Any Input
• Superior Sonic Quality
• Front Panel or PC Programming and Control
• USB and RS-232 Interface
• Third Party Control Friendly
• XLR Audio Connections
• Balanced Inputs and Outputs
• Parametric Filters and Comp/Limiter to Control Feedback Problems
• Linkwitz-Riley, Bessel and Butterworth Filters
• 12, 18, 24 and 48dB/Octave Slopes
• Parametric EQ: 1/64th to 4 Octave Range
• 682ms Input and Output Delay
• Limiter on Each Output
• Individual Input and Output Metering
• Four Levels of Security
Specifications
Input:Active Balanced, 18 kohms
Max Input Level:+20dBu
Input Gain Range:+12/-40dB, 0.1dB Increments
Output:Active Servo Balanced, 100 ohms
Max Output Level:+20dBu
Output Gain Range:+12/-40dB, 0.1dB Increments
Polarity:0 or 180 degrees
Frequency Response:20 Hz-20kHz, ±0.25 dB
THD:<0.01% @1 kHz, +20 dBu
Dynamic Range:>110 dB (20 Hz-20 kHz) unweighted
Output Noise:<-90 dBu unweighted
EQ Filters:6 per input | 4 per output
Parametric EQ Bandwidth:1/64th Octave to 4 Octave
Parametric EQ Range:+15/-30dB, 0.1 dB incr
Frequency Resolution:1/24th octave
High-Shelf EQ Slope:6 or 12dB/Octave
High-Shelf EQ Frequency Range:19.7Hz to 2Khz
High-Shelf EQ Range:+/-15dB, 0.1dB incr
Low-Shelf EQ Slope:6 or 12dB/Octave
Low-Shelf EQ Frequency Range:3.189Khz to 20.159KHz
Low-Shelf EQ Range:+/-15dB, 0.1dB incr
Maximum Input Delay:682ms, 20uS incr
Maximum Output Delay:682ms, 20uS incr
Delay Increment:20uS
Crossover High Pass Filter Type:Linkwitz-Riley, Bessel, Butterworth
Crossover High Pass Filter Slope:12, 18, 24 and 48dB/Octave
Crossover Low Pass Filter Range: Off to 21.98KHz, 245 step incr
Compressor/Limiter Threshold:-20dBu to +20dBu, 1dB incr
Compressor/Limiter Ratio:1.2, 1.5, 2, 3, 4, 6, 10, 20:1, Infinite:1
Compressor/Limiter Attack:0.5ms to 50ms per dB
Compressor/Limiter Release:10ms to 1Sec per dB
Compressor/Limiter Range:20Hz to 10.6KHz
Input A/D:24 bit
Output A/D:24 bit
Processor:24 bit, 56 bit accumulator
Sample Rate:48KHz
Propogation Delay:1.46ms
Power Requirements:90-240VAC, 30W
Shipping Weight:13lbs (Maximum)
Dimensions :19.0”W x 3.5”H x 8.5”D
Connections :XLR
Environmental :40-120 deg. F (4-49 deg. C) noncondensing
Applications:
• Conventional PA Systems
• FOH
• Monitors
• Aux fed subs
• L-C-R configurations
• Multi-zoned systems